BMW G82/G83 M4 MP Style Dry Carbon Fiber Rear Replacement Corner Side Winglets Pre Preg

Package Includes:

1 x set BMW G82/G83 M4 2021-Dry Carbon Fiber MPerformance Style Rear Replacement Corner Side Winglets (Pre Preg)

(M4 G82 Fitment Only)

MP Style Dry Carbon Rear Winglets: The G82/G83 Essential

Fitment: 2021+ BMW M4 (Coupe & Convertible)

If the rear of your M4 feels like it’s missing that final “track-ready” touch, these MP Style corner winglets are the answer. Designed specifically for the G82 and G83 chassis, they add a sharp, aerodynamic edge to the lower bumper that balances out the car’s aggressive front end.

The Dry Carbon Difference

Most carbon on the market is “wet” carbon—heavy, thick, and prone to yellowing. We use 100% Pre-Preg Dry Carbon Fiber.

• Ultra-Thin & Flush: Because it’s vacuum-formed, the fitment is tighter to the body than standard carbon.

• Warp-Resistant: Handles exhaust heat and sun exposure without losing its shape.

• Classic 3K Twill: Matches your OEM BMW carbon trim perfectly.

Why These Winglets?

• Aggressive Stance: They pull the rear visual lines lower to the ground for a wider, more planted look.

• UV-Protected: Finished with a high-gloss clear coat that won’t peel or fade after a summer of driving.

• Simple Upgrade: A bolt-on modification that completely changes the rear profile of the car.

Quick Specs

• Fits: 2021-Present BMW M4 (G82/G83).

• Material: Authentic Dry Carbon Fiber.

• Style: M-Performance (MP) Inspired.

• What’s Included: Left and right rear side winglets.

Pro Tip: While these can be installed with high-strength 3M tape, we always recommend a couple of self-tapping screws on the underside for total peace of mind at highway speeds.

Fitment:

BMW M4 2021-BMW G82/G83 M4 2021-Performance Style Dry Carbon Fiber Rear Corner Side Winglets

This product is made perfectly to fit a BMW G82/G83 M4 2021-Present, this is a replacement part, to install remove the gloss black corner piece from the rear bumper, it is a very simple method of installation, on the underneath of the gloss piece you will see 4 plastic black trim clips, use a pry tool to remove these clips, once the clips have been removed, press the tabs on the inside of the bumper where it is holding the original trim in place, by looking at the replacement part it will also help understand on where all the OEM clips are as the fitment is exactly the same, therefore reinstall will be the same process in reverse. If you are aiming for the M.P style look for your G8X, look no further as we have a wide range of stock for the G8x BMW M3 M4 including the full range of M.P Style parts all in dry carbon pre preg in the highest quality with even the weave of the carbon to match OEM. With these products being Pre Preg also as OE products the clear coat is like a glass.

We allocate 15-20 minutes for installation in our workshop for installation of this product.

BMW G82 G83 M4 2021-Present