Fenders
6 products
Carbon fiber fenders, fender flares and wheel arch trims for the Mercedes C63 and G-Class and the BMW G80 M3, G82 M4 and G87 M2. Only one listing is a full panel swap: pre-preg dry carbon front fenders for the pre-LCI C63 and C63 S (W205), made to replace the factory fenders.
For the pre-facelift G-Class there are flared wheel arches in two widths. The BMW parts are trims: an OEM-style side fender piece for the G80 M3 or G82 M4 that sticks on over the factory part, an MP-style wheel arch trim for the G80 M3 and a rear arch trim for the G87 M2.
Fenders buying guide
Carbon fenders, flares or trims
These are three very different jobs. The C63 fenders replace the factory panels and use the original mounting locations, so treat them as body-shop work with panel alignment. The G-Class flares widen the arches for a broader stance, and the listing strongly recommends professional installation. The BMW trims are the easy end: the G80/G82 side fender piece goes on with adhesive over the factory component, and the G87 rear arch trim has 3M tape pre-applied.
Fitment points to check
The C63 fenders are listed for the pre-LCI W205 C63 and C63 S only; in our fitment data the facelift starts with the 2019 model year. The G-Class flares fit pre-facelift cars and not the facelift, and the V2 set is wider than the standard one. The side fender trim is sold in G80 and G82 versions, and the MP-style arch trim is for the G80 M3. The G87 piece fits over the vent on the rear arch, so despite being filed with front parts it belongs at the back of the car. For fender vents and air breathers, see vent trims.
Fitting tips
For stick-on trims, clean and dry the surface first; the G87 listing also suggests a little heat on the back of the part to activate the tape. Test-fit every part before paint or adhesive, because installed parts can't be returned. If a part doesn't fit the car on its product page, contact us before installing it and our fitment guarantee covers the return shipping.
Frequently asked questions
Do you sell full carbon front fenders for the G80 M3?
Not at the moment. The G80 and G82 parts here are trims: an OEM-style side fender piece and an MP-style wheel arch trim. The G80 and G82 fender air breathers are listed under G80 M3 vent trims. If you're after a full replacement fender, text us at 609-525-4865 to ask about options.
How much wider is the V2 G-Class flare?
The listing describes the V2 set as wider than our standard flares, for a stronger widebody look, but gives no measurement. Both sets are pre-preg dry carbon for pre-facelift cars. If the exact width matters for your wheel and tire setup, ask us before you order.
How does the G87 rear arch trim attach?
It sits over the vent on the rear wheel arch and comes with 3M tape already applied. Clean and dry the area, position the trim, then warm the back of it gently so the tape bonds. It's pre-preg carbon with a high-gloss finish and fits the G87 M2 only.