W463 G-Class
7 products
G63 carbon fiber parts for the 2019-on G-Class, the generation Mercedes still calls W463 and many sellers call W463A or W464. Most pieces are pre-preg dry carbon and made for pre-facelift trucks, sold in the US as 2019–2024 models.
Outside, there are standard and V2 wide fender flares, a front bumper guard, front and rear bumper trims, a bumper vent cover, a rear wing spoiler, door handle covers and side moulding covers. Inside, there are door handle and seat side trims. The hood scoop center trim is the one piece listed for both pre-facelift and 2025-on trucks.
Mercedes W463 G-Class buying guide
Which G-Wagon generation?
The G-Class was rebuilt for the 2019 model year: 2.5 inches wider than the old truck and sharing only a handful of small parts with it. Nothing here is listed for a pre-2019 G-Wagon. Mercedes updated the G again for 2025 with a new grille, revised front and rear bumpers, a spoiler at the roof edge and new A-pillar trim, and the flares, bumper parts, door handle and moulding covers and rear wing here are listed for pre-facelift trucks only, so they aren’t for a 2025-on G. Some listings say 2019–2023; a US 2024 model is still pre-facelift, so text us at 609-525-4865 to confirm for a 2024.
G63 fender flares: standard or V2
Both flare sets are for pre-facelift G63 and G500 trucks, and the V2 set stands out wider than the standard one. From the factory, the G63 already wears slightly wider flares than the G550, so if you drive a G550, ask us before choosing. Either set is a job for a body shop. See the G-Class fender flares.
Stick-on trim or shop install
The door handle covers (a 5-piece set that includes the tailgate handle), side moulding covers, bumper vent cover and interior door handle trims go over the factory parts with 3M tape, no drilling. The seat side trims use automotive adhesive tape. The front bumper guard and the front and rear bumper trims are different: they replace the factory pieces rather than covering them, and the rear wing spoiler needs drilling, so have those fitted professionally. For the hood scoop trim, the listing recommends a bonding adhesive. Browse G-Class bumper trims and covers or G-Class interior trim.
Frequently asked questions
Will these parts fit a 2025 or newer G-Class?
Only the hood scoop center trim is listed for facelift trucks. The fender flares, bumper guard and trims, door handle and moulding covers, interior door trims and rear wing spoiler are pre-facelift parts. The seat side trims are listed for the W464 without a facelift limit, so text 609-525-4865 to check them for a 2025-on truck.
Are the W463, W463A and W464 the same G-Class?
Mercedes kept the W463 model code when it launched the new G-Class for 2019, and W463A or W464 are names widely used for that generation to tell it apart from the older truck. Our listings say W464 and this page says W463, but both mean the same thing here: if your G-Class is a 2019 or newer, you’re in the right place.
Do the G63 bumper parts fit a G550?
The bumper guard, bumper trims and bumper vent cover are named for the G63, which has its own AMG bumper. If you drive a G550, text a photo of your front and rear bumpers to 609-525-4865 before ordering, and we’ll tell you whether they match.
Do the door handle covers replace the factory handles?
No. The 5-piece set covers all four door handles and the tailgate handle, and each piece fits over the original handle with automotive-grade 3M tape. There’s no drilling and nothing permanent, but the set is listed for pre-facelift trucks only.