Mercedes G-Class G63 Bumper Trims & Trim Covers
4 products
G63 bumper trim and exterior covers in pre-preg dry carbon, for the 2019-on G-Class before the 2025 facelift.
The front bumper guard and the front and rear bumper trim set are named for the AMG G63 and replace the factory pieces rather than covering them. The door handle covers, a 5-piece set that includes the tailgate handle, and the side moulding covers go over the original parts with 3M tape. Every piece has a high-gloss, UV-resistant clear coat.
Mercedes G-Class G63 Bumper Trims & Trim Covers buying guide
Replacing the G63 bumper guard and bumper trims
Both bumper parts take the place of the factory components instead of sitting on top of them, so their listings recommend a professional installer. They're made around the G63's AMG bumpers, which have a more aggressive lower fascia than the G550's, so G550 owners should send us photos of both bumpers first. The trim set is listed for 2019–2024 trucks, while the bumper guard listing stops at 2023. If you have a 2024, text 609-525-4865 to check the guard before ordering. Neither suits a 2025-on truck, because the facelift brought new front and rear bumpers.
Door handle and side moulding covers
The door handle covers fit over all four door handles and the tailgate handle, and the moulding covers fit directly over the factory side mouldings. Both use pre-applied automotive 3M tape, need no drilling and make no permanent change, and both are listed for pre-facelift trucks only. They give an OEM+ look without swapping any factory part. Clean each surface, line each piece up dry, and only then peel the backing: once a cover is stuck down it counts as installed and can't be sent back.
For the cabin, see the G-Class interior trims, and find the flares, wing and hood trim among all G-Class parts.
Frequently asked questions
Does the carbon bumper guard go over the factory guard on a G63?
No, it replaces it. The listing describes it as a direct replacement for the factory front bumper guard, not an overlay or cover, and the front and rear trim set works the same way. That means removing the original parts, so we recommend a professional. Check the carbon piece against your truck before anything comes off.
Can I fit the G-Class door handle covers myself?
The listing describes an easy install. The set goes over the factory handles with automotive-grade 3M tape and needs no drilling, and it covers all four doors plus the tailgate handle. Clean each handle and dry-fit the covers to check the alignment before pressing them on, because once stuck down they count as installed and can't be returned.
Which of these fit a 2024 G63?
The door handle covers, the side moulding covers and the front and rear bumper trim set are all listed up to 2024 pre-facelift trucks. The front bumper guard listing says 2019–2023, so text a photo of your front bumper to 609-525-4865 before ordering it for a 2024. Nothing on this page is listed for the 2025-on facelift.